Careful!

You are browsing documentation for a version of Kuma that is not the latest release.

Looking for even older versions? Learn more.

Service Discovery

This page explains how communication between the components of Kuma handles service traffic. Communication is handled between the data plane proxy (kuma-dp) and the control plane (kuma-cp), and between multiple instances of the data plane proxy.

When a data plane proxy connects to the control-plane, it initiates a gRPC streaming connection to the control plane. It retrieves the latest policy configuration from the control plane and sends diagnostic information to the control plane.

In standalone mode the kuma-dp process connects directly to the kuma-cp instances.

In a multi-zone deployment the kuma-dp processes will connect to the zone control plane, while the zone control planes will connect to the global control plane over an extension of the xDS API that we have built called “KDS” (Kuma Discovery Service). In multi-zone mode, the data plane proxies never connect to the global control plane but only to the zone ones.

The connection between the data-planes and the control-plane is not on the execution path of the service requests, which means that if the data-plane temporarily loses connection to the control-plane the service traffic won’t be affected.

While doing so, the data-planes also advertise the IP address of each service. The IP address is retrieved:

  • On Kubernetes by looking at the address of the Pod.
  • On Universal by looking at the inbound listeners that have been configured in the inbound property of the data-plane specification.

The IP address that’s being advertised by every data-plane to the control-plane is also being used to route service traffic from one kuma-dp to another kuma-dp. This means that Kuma knows at any given time what are all the IP addresses associated to every replica of every service. Another use-case where the IP address of the data-planes is being used is for metrics scraping by Prometheus.

Kuma already ships with its own DNS on both standalone and multi-zone modes.

Connectivity among the kuma-dp instances can happen in two ways:

  • In standalone mode kuma-dp processes communicate with each other in a flat networking topology. This means that every data-plane must be able to consume another data-plane by directly sending requests to its IP address. In this mode, every kuma-dp must be able to send requests to every other kuma-dp on the specific ports that govern service traffic, as described in the kuma-dp ports section.
  • In multi-zone mode connectivity is being automatically resolved by Kuma to either a data plane running in the same zone, or through the address of a zone egress proxy (if present) and zone ingress proxy in another zone for cross-zone connectivity. This means that multi-zone connectivity can be used to connect services running in different clusters, platforms or clouds in an automated way. Kuma also creates a .mesh zone via its native DNS resolver. The automatically created kuma.io/zone tag can be used with Kuma policies in order to determine how traffic flow across a multi-zone setup.

By default cross-zone connectivity requires mTLS to be enabled on the Mesh with the appropriate Traffic Permission to enable the flow of traffic. Otherwise, unsecured traffic won’t be permitted outside each zone.

Last Updated: 11/4/2022, 19:20:08 PM